Chamption Moto UK Accessories

Kriega US-10 Motorcycle Tailpack

RRP: 55.00
Our Price: 54.95
Size: 10 Litres
Colour: Black Qty:
Features

Kriega US-10 Motorcycle Tailpack

 

 

Buy the new 2012 Kriega US-10 Motorcycle Tail Pack Online

 

 

FREE UK Mainland P&P

 

 

100% Waterproof Drybag Accessory /Tailpack

 

 

A 100% waterproof tailpack, which also fits to the Hydro 3 and the R15, R20, R25, R30 or R35 rucksacks, increasing capacity by 10 litres.

 

The US-10 tailpack is perfect for those riders who are looking for a smaller tailpack.  It is designed to fit most race-rep style seat pads (attachment straps included). The pack is easily attached / removed by 4 x quick-release buckles. No extra bungees or covers are required.

 

 

Technical Specifications:

 

  • Size: 330(H) x 220(W) x 125(D) mm
  • 10-litre capacity
  • 100% waterproof main body
  • Side access zip-pocket (water-resistant)
  • Coated-mesh pocket
  • 1000D Dupont Cordura
  • RHINOTEK: abrasion resistant fabric
  • HYPALON: abrasion resistant re-enforcement
  • DRYPACK: taped-seam liner
  • 420D ripstop nylon - lightweight yet extremely strong
  • Acetal ITW Airloc buckles
  • YKK water-resistant zip
  • 10-year guarantee

 


Mesh Pocket:

 

The base of the US-10 tailpack has an anti-slip coated-mesh pocket for storage of D-locks / chains etc.

 

 

Fitting:

 

The standard fit is designed for a sportsbike seat-pad. Remove the 2 x fitting straps from the US-10. Remove the bike's rear seat-pad. Lay the straps into the void of the rear seat. Replace the seat-pad and ensure it is correctly locked down (Thread the top roll-over buckle through the pillion grab-strap if present). Finally, connect all four x quick-release buckles and tighten pack down on to the seat. NB - it is important to use the 2 x strap-tidy components on each compression strap. These components ensure that there is no web-creep once the buckle has been tightened.
 
The US-10 can fit a tradiional style one-piece seat. We recommend the use of the optional connector-straps (see link below). This option allows the loose strap-ends to connected together over the top of the seat, when not using the tailpack. The US-10 can also be used more effectively on racks by the use of the 4 x loop straps option(see link below). This strap spec. allows the web to be 'tied' to the rack, rather than just run under it.


 

Expansion:

 

Hydro-3
Retro-fit the US-10 to the Hydro-3 hydration pack to increase carrying capacity by 10-litres. Fit to backpack by threading the 2 x compression straps through the 4 x web loops on the front and by threading the top US-10 roll-over strap through the top horizontal web loop on the Hydro-3.

 

R15
Retro-fit the US-10 to the R15 backpack to increase carrying capacity by 10-litres. Fit to the rucksack by threading the 2 x compression straps through the 4 x web loops on the front and by threading the top US-10 roll-over strap through the top horizontal web loop on the R15.

 

R20
Retro-fit the US-10 to the R20 backpack to increase carrying capacity by 10-litres. Fit to the rucksack by threading the 2 x compression straps through the 4 x web loops on the front and by threading the top US-10 roll-over strap through the top horizontal web loop on the R20.

 

R25
Retro-fit the US-10 to the R25 backpack to increase carrying capacity by 10-litres. Fit to the rucksack by removing 1 x male buckle off each of the US-10s compression straps. Feed the free-end of web through the 4 x square rings on the front of the R25. Replace the buckle and connect all 4 x buckles back to the US-10. NB - if the rucksack is not fully packed out, it is possible to use the R25's compression straps to connect to the US-10.

 

R30
Retro-fit the US-10 to the R30 backpack to increase carrying capacity by 10-litres. Fit to the rucksack by removing 1 x male buckle off each of the US-10s compression straps. Feed the free-end of web through the 4 x square rings on the front of the R30. Replace the buckle and connect all 4 x buckles back to the US-10.

 

R35
Retro-fit the US-10 to the R35 backpack to increase carrying capacity by 10-litres. Fit to the rucksack by removing 1 x male buckle off each of the US-10s compression straps. Feed the free-end of web through the 4 x square rings on the front of the R35. Replace the buckle and connect all 4 x buckles back to the US-10. NB - if the rucksack is not fully packed out, it is possible to use the R35's compression straps to connect to the US-10.

 

 

Reviews

 

19/11/11

Simply Brilliant 

*****

The US10 is a superb product. Brilliantly simple and totally waterproof. It'll fit on pretty much any bike in seconds, is so well built and its British, what more can you ask for?

 

8th Jun 2011

Fits perfect on Kawasaki Z 1000 '11 

***** 

I just received the pack and I am very please with the quality, touch and feel :-). Could not test it in rain, but from how it looks, it will not be a problem. I order from Germany and delivery was quick. Thanks for that.

 

4th Dec 2010

us 10 

***** 

would like to say a big thank you kriega 

i have my us 10 4mths + now used in all weathers.does what it says on the tin keeps everything dry.

well worth the money.

ride z750.

It carries oxford hardcore chain with ease, light weight jacket various tools for work.

If anyone is thinking of a tailpack us 10 is worth it.

Would be lost without it now 

 

 

Also consider the Kube Pocket for your bits n bobs and/or the 25-Ltr US-Liners to go inside your rucksacks.

 

 

Shopping Cart
No:ITEMS 0
Choose Currency Checkout
Your Account
Username Password New Customer Forgot Password
Advanced Search
Order Now 02920 807614 Payment Options Sage Pay & PayPal Comodo EV SSL Certifictaed