Chamption Moto UK Mens Clothing

Gerbing's Heated Jacket & Trouser Liners

RRP: 339.98
Our Price: 324.95
Size: Select from the below options
Colour: Black Qty:
Jacket Size:
Trouser Size:
Accessories:
Portable Temp Controller £57.95
Portable TC & Cover £65.95
Portable Dual Temp Controller £82.95
Portable Dual TC & Cover £92.95
Permanent Temp Controller £64.95
Permanent Dual Temp Controller £94.95
Cable Splitter £7.95
Features
Gerbings Heated Motorcycle Jacket & Trouser Liners

 

 

Save with Gerbings Heated Motorcycle Jacket & Trouser Liner combo deal

 

 

Great savings to be had this winter on this heated motorcycle clothing combination deal.

 

 

Heated Motorcycle Jacket Liner

 

  • Heating pads on the chest, back, collar, and sleeves
  • Compressible, water-repellent, durable, Thinsulate® insulation
  • Teflon® coated, wind-resistant, soft nylon shell
  • Inside and outside pockets
  • Silky soft micro denier collar
  • Form-fitting patterns and sizing to fit snugly and easily under your outer garments
  • Glove plug pockets placed on the sleeves secure the plugs when not in use
  • Power Distribution Unit eliminates dangling cords
  • Dual 2 Wiring configuration (for one user only)
  • Lifetime warranty on heating elements
  • Incorporates Gerbing's Microwire® heating technology that uses micro-sized heating fibres to surround the body with warmth

 

 

Note:  This is a heated motorcycle jacket liner, to be worn underneath your regular motorcycling jacket.  Worn on it's own, you are at risk of looking like a bouncer.

 

 

How it Works

 

 

 

 

Specifications

 

Heat                 Microwire® Heat Technology
Source             12-volts DC
Current            6.4 amps
Watts               77 watts
Surface Temp   135°F +/- 5°F at 32°F

 

 

Gerbing's Chest Size: Your Gerbing's Chest Size is different from your actual Chest Measurement.  Measure your chest around the fullest area of the chest, holding tape firm and level. Hold arms out, place tape, drop arms and record measurement.  Reference the chart below to determine your Gerbing's Chest Size from your actual chest measurement.  If your stomach is larger than your chest, use the larger measurement.

 

Actual Sleeve Size: With arm in riding position, measure from the back, start from the center of neck, over point of shoulder, around back of elbow and down outside of arm to the wrist.  This sleeve measurement is your actual sleeve size.  If your sleeve measurement falls between two sizes, then go up to the next sleeve size.

 

 

 Chest Size (inches)
36-3838-4040-4242-4646-5050-54
 Sleeve Size (inches)
33-3433-3433-34
35-36
37-38
37-38
 Jacket Liner Size
XSSMLXL2XL

 

 



 

 

 


Heated Trouser Liner

 

  • Compressible, water-repellent, durable, Thinsulate® insulation
  • Teflon® coated, wind-resistant, soft nylon shell
  • Form-fitting patterns and sizing to fit snugly and easily under your outer garments
  • Full length zipper from hip to bottom of pant for each side
  • Lifetime warranty on the heating elements

 

 

Note:  This is a trouser liner, to be worn underneath your regular motorcycling trousers/jeans/slacks/pants/pantalons/etc.

 

 

 

 

 

Specifications

 

Heat                 Microwire® Heat Technology
Source             12-volts DC
Current            3.6 amps
Watts               44 watts
Surface Temp   125°F +/- 5°F at 32°F

 

 

 

Hips Size:  This is your HIP measurement, not your waist.  Measure around fullest point of seat while standing.  The following table shows your Hips Size based on your Hips Measurement.

 

Belt to Floor Size:  Measure along the outer seam from the top of the belt down to the floor with shoes on.  The following table shows your Belt-to-Floor Size based on this measurement.

 

 Hip Size (inches)
404244465050
 Belt to Floor (inches)
404246
48
48
46
 Trouser Liner Size
XSSMTLTXLT2XL

 

 



 

 

 

 

Temperature Controllers:

 

The jacket as delivered is ready to go, i.e. you need not purchase any accessories to make it work.  Insoles plug into the trousers, trousers into the jacket and the jacket to the bike.  Gloves can either plug into your jackets dual controller or a single controller with a splitter. 

 

In the absence of a temperature controller, temperature is controlled only by plugging/unplugging from the bike.  If you're not up for a temp. controller, then for convenience we recommend buying the Lighted On/Off Switch.  Think; the flick of a switch vs. unplugging electrical connectors!

 

The purpose of Temp. Controllers is to allow the rider to vary the heat output.  Dial in your comfort level with a simple turn of the dial!  Unlike older rheostat type thermostats, Gerbing's digital temp controllers draw just enough current to maintain the heat you need.  Temp. Controllers allow you to adjust for your desired heat output of all 12v products, but are not designed to be used with 7v products. 

 

The single temp. controller sets the same temperature for all clothing items.  With the dual controller, the gloves are on a different circuit from the jacket, trousers and insoles and thus can be set to a different temperature.  This is very useful as hands seem to suffer most from wind chill.  So you can keep your hands toasty warm whilst not getting a sweat on elsewhere!  Permanent controllers are set into the fairing panel and requires 'hole drilling'! 

 

For more information on controllers, Click on the links below.  Select your preference from the accessory list at the top of this page.

 

Portable Controller and cover

Portable Dual Controller and cover

Permanent Controller

Permanent Dual Controller

 

Note: If you are purchasing a single controller to use with one of the jackets that are wired with the Dual 2 wiring systems, you will need to purchase a splitter if you choose to operate other heated clothing with the jacket.

 

 

Shopping Cart
No:ITEMS 0
Choose Currency Checkout
Your Account
Username Password New Customer Forgot Password
Advanced Search
Order Now 02920 807614 Payment Options Sage Pay & PayPal Comodo EV SSL Certifictaed